Guralp-systems CMG-5T Uživatelský manuál stáhnout pdf (Strana 22)

CMG-5T

6 Connector pinouts

6.1 5Ts with high gain output option

The 5T sensor has a single connector for both power and signal output.

The following details apply if the second amplification stage is being

used to provide a high (10 ×) gain output channel.

This is a standard 19-pin “mil-spec” plug,

conforming to MIL-DTL-26482 (formerly

MIL-C-26482). A typical part-number is

02E-14-19P although the initial “02E” varies

with manufacturer.

Suitable mating connectors have part-

numbers like ***-14-19S and are available

from Amphenol, ITT Cannon and other

manufacturers.

Pin Function Pin Function

A High gain +ve, N/S channel L Low gain –ve, vertical channel

B High gain –ve, N/S channel M Low gain +ve, vertical channel

C Low gain +ve, N/S channel N High gain –ve, vertical channel

D Low gain –ve, N/S channel P High gain +ve, vertical channel

E Calibration signal (all channels) R High gain +ve, E/W channel

F Power +12 V (all channels) S Calibration enable (all channels)

G Power 0 V (all channels) T

Signal ground (essential if a long

power cable is used)

H not connected U Low gain +ve, E/W channel

J Open/closed loop (all channels) V High gain –ve, E/W channel

K Low gain –ve, E/W channel

Wiring details for the compatible socket,

***-14-19S, as seen from the cable end.

22 Issue E

1 2 ... 17 18 19 20 21 22 23 24 25

Žádné komentáře

Guralp-systems CMG-5T Uživatelský manuál Strana 22